Remember to disinfect your hands and your customer’s hands first.
Work around the cuticles - adjust the method to your customer’s needs. You can push them back using a cuticle pusher, stick and work around them using selected bits.
Matt the nail plate with a 100/180 gradation buffer, and remove the dust with a soft brush.
Soak a cotton swab with purple Cleaner and carefully dehydrate each plate.
Apply primer - most often it will be Acid Free Primer.
Apply a thin layer of a selected gel polish base and cure for 30 seconds in the lamp.
Apply the Eucalyptus gel polish to the nails. Two layers are needed to achieve full coverage. Cure each layer for 30 seconds in the MultiLed lamp.
Cover the nails with a selected top and cure for 30-60 seconds in the lamp.
Wait for about 1 minute after the hands are removed from the lamp.
If you used a top coat with a sticky layer, wipe each nail with a dust-free cotton swab soaked in Shea Super Shine Effect Cleaner.
If you wish to make your design even shinier, additionally polish your nails with a dry cotton swab.
*top without a sticky layer does not have to be wiped with Shea Super Shine Effect Cleaner. It is enough to apply a drop of Shea Elixir with creatine on the nail folds one minute after removing the hands from the lamp.
