Golas Mineral Base is a 3-in-1 multitasking product that will change the work in your salon. In a short time, you’ll create a complete, phenomenal nail styling that will surely delight your customers.
Mineral base properties – Golas
Thanks to the 3in1 formula, it can be used as a base, colour and topcoat.
It allows you to reduce the time of styling to 30 minutes.
It provides coverage of around 92% with only two layers.
Fixes patches and gently extends the natural nail plate (behind the tip).
Allows you to build up an ideal C-curve.
Medium-thick consistency facilitates application - it does not flood the cuticles.
Can be used as a finish to gel polish and gel stylings.
Works great as a base for pastels, nude shades, ombre styling, baby boomer and quick nail art designs.
Tips on how to use Mineral Base
The curing time for the Mineral Base is about 30-60 seconds.
The second, slightly thicker layer, which is to build up the C-curve, requires longer curing in the lamp (approx. 1 min). A similar process should be followed for nail extensions.
To preserve the gloss of the last layer of styling, after curing the base, wait about 1 minute for it to cool down. Only then do we remove the dispersion layer with a Cleaner.
Wash and disinfect yours and your customers' hands. Put on gloves. Assess the condition of the customer's hands and nails to make sure that there are no contraindications for the treatment.
Push the cuticles back using a cuticle pusher or a stick and treat them with e-file bit, e.g. 9, 1.
Thoroughly matt the nail plate with a 100/180 grit buffer.
Remove the excess nail dust with a soft brush.
Dehydrate the nail plate with a dust-free cotton swab and purple Cleaner.
Apply the appropriate primer (Acid Free Primer or Acid Primer).
Apply a thin layer of Mineral Base and cure in the lamp (30 seconds in the MultiLed lamp).
Apply a second, thicker layer of the base to gently build up the nail so that it is not flat and cure again. You can turn the hand so that the product levels and creates a perfect surface (due to the thicker layer, the curing time can be extended to 60 seconds).
Mineral Base does not require any top coat, remove dispersion layer using Cleaner Super Shine or Shea Super Shine.
