EXPERT Base with a complex of POLYAMIDE fibers is a new generation UV product! EXPERT base is a multifunctional solution that gives natural nails unprecedented SOLID SUPPORT. It is a basic product for special tasks and the most difficult cases! It is recommended for those whose hybrid manicure does not last a guaranteed period of time, e.g. those with hormonal problems affecting hybrid adhesion.
Product features:
1. MAXIMUM adhesion to the natural nail plate.
2. HIGH RESISTANCE to mechanical damage, thanks to the cushioning fibers.
3. STRENGTHENING and hardening the flaccid nail plate properties.
4. Optimal consistency, enabling REPAIR and EXTENSION of natural nails (up to 5 mm).
5. VERSATILITY - the base is perfect for gel lacquers and UV gel.
6. STICKY DISPERSION, which reduces the "sliding" of colored products.
The safety of Mistero Milano products is supervised by a certified team of experts in the Safety of Cosmetics and Household Chemistry.
The information contained in the product card is accurate and true. Nevertheless, the manufacturer is not responsible for the storage, transport and use of the product if it is other then intended. Mistero Mil
How to use
1. After preparing the plate for hybrid manicure, degrease the nails with Nail prep STANDARD (art. No. 8620).
2. Depending on the type and condition of the plate, apply Primer DELICATO (Art. No. 8601) or Primer STANDARD (Art. No. 8600).
3. Apply a layer of EXPERT BASE base coat (Art. No. 1096) **, then cure in a lamp (UV 120 s, LED 60 s) *.
4. Apply a layer of gel lacquer, cure in the lamp (UV 120 s, LED 30 - 60 s) *, repeat the procedure.
5. Secure the manicure with QUICK TOP topcoat (Art. No. 1098), ensuring that the free edge of the nail is completely closed, then cure in a lamp (UV 120 s, LED 60 - 90 s).
* the exact curing time of UV products depends on the type and power of the lamp.
** to add volume and smoothen the plate, rub the first thin layer of the base and then (without curing) apply the second, thicker layer. In order to extend or repair the nail, rub the first thin layer, then place the form and apply the second building layer (extend with the base up to 5 mm).
*** extending the curing time to 90 s is recommended (regardless of the lamp power) to prolong spectacular topcoat shine.
Removal :.
1. Use a BASIC 100/180 file to matt the surface of the topcoat.
2. Wrap the nails with a cotton pad soaked in Remover DISSOLVERE (Art. No. 8805) and secure with a suitable foil.
3. After 5 - 8 minutes, use a buffer to remove the rest of the softened gel lacquers and base from the nail surface.
WARNING: The product is intended for professional use only. Keep out of the reach of children.
