MATT THAT top is the guardian of perfect nails, choose the perfect top for yourself. Matt That Top No Wipe is a product with a perfectly matt finish that does not change while manicure lasting! Forget about the satin matt effect, our MATT THAT is a TOTAL matt that does not rub off and does not shine! This effect is possible thanks to the use of the soft touch coating, which does not shine, at the same time, thanks to its reduced porosity, it does not collect dirt. If the nails are dirty with e.g. fluid during the application of make-up or gently shine due to the application of the cream, just wash your hands with soap under running water and your nails will return to the perfect matt again! An additional advantage of the top is the formula without cleansing need, so you can finish the styling procedure right after the top is cured.
How to use Application 1. After preparing the plate for the manicure, degrease the nails with Nail prep STANDARD (Art. No. 8620), 2. Depending on the type and condition of the plate, apply Primer DELICATO (article number 8601) or Primer STANDARD (article number 8600) 3. Apply a layer of FLEXI Basecoat (Art. No. 9496), then cure in the lamp (UV 120 sec, LED 30 - 60 sec) * 4. Apply a layer of gel lacquer, cure in a lamp (UV 120 s, LED 30 - 60 s) *, repeat. 5. Secure with MATT THAT Matt Top No Wipe (Art. No. 1097), ensuring that the free edge of the nail is completely closed, then cure in the lamp (UV 120 s, LED 60 - 90 s) *. * the exact curing time of UV products depends on the type and power of the lamp Removal of manicure: 1. Use a BASIC 100/180 file to polish the topcoat surface. 2. Wrap the nails with a cotton pad soaked in Remover DISSOLVERE (Art. No. 8805) and secure with a suitable foil. 3. After 5 - 8 minutes using a polisher, remove the residue of the soft gel lacquer and base from the surface of the nails.