New, smaller capacity of the self-leveling BASE EXTRA, which you like so much, and is used for nail extension and repair.
It has a medium-thick consistency, thanks to which it does not run off even when working on five nails at the same time. Provides incredible durability and resistance to chipping, up to 5 WEEKS. After a warm bath, it does not deform, which is the case with bases with low quality values. It has a flat, short brush that facilitates application, and the unique formula allows you to extend the nails up to approx. 7 mm.
Necessary base for hybrid nail polishes for natural nails. This varnish has a unique formula that allows you to extend the nails up to approx. 7 mm. It has a medium-thick consistency, thanks to which it does not run off even when working on five nails at the same time.
How to use?
Base Extra version without the application of colored hybrid varnish:
1. Gently polish the nail with a polisher, remove the dust formed, then rinse with a Cleaner.
2. Apply the primer * on the prepared nail plate, and then apply a thin layer of Base Extra, cure in a LED or UV lamp according to the table.
3. Apply a second, slightly thicker layer on the natural nail and on the template (if you decide to extend it). Cure the whole in a LED or UV lamp according to the table. In order to obtain the proper structure of the nail, the operation should be repeated.
4. If necessary, after hardening, the nails should be smoothed out with a 180 grit file. Remove the dust and rinse with Cleaner.
5. Finally, apply a thin layer of Base Extra and harden again. After curing, rinse the sticky layer with Cleaner. **
* We recommend using a dedicated primer for a given nail plate.
** The product leaves a shine / DOES NOT REQUIRE to use a Top
Base Extra version with the application of colored hybrid varnish:
1. Gently polish the nail with a polisher, remove the dust formed, then rinse with a Cleaner.
2. Apply the primer * on the prepared nail plate and then apply a thin layer of Base Extra, cure in a LED or UV lamp according to the table.
3. Apply a second, slightly thicker layer on the natural nail and on the template (if you decide to extend it). Cure the whole in a LED or UV lamp according to the table. In order to obtain the proper structure of the nail, the operation should be repeated
4. If necessary, after hardening, the nails should be smoothed out with a 180 grit file. Remove the dust and rinse with Cleaner.
5. Apply a layer of hybrid varnish in the selected color, cure in a LED or UV lamp according to the table. The darker the color, the longer the hardening time. Repeat the operation to obtain a depth of color.
6. Finally, apply a thin layer of TOP depending on the selected styling. Top should be cured in a LED or UV lamp according to the table.
* We recommend using a dedicated primer for a given nail plate.
Removal :
Acetone can be used to remove a thin layer, while a milling machine or a file should be used for superstructures or extensions.
Composition
DI-HEMA TRIMETHYLHEXYL DICARBAMATE, HEMA, HYDROXYPROPYL METHACRYLATE, ISOBORNYL METHACRYLATE, ACRYLIC ACID, HYDROXYCYCLOHEXYL PHENYL KETONE, CI 60725, ETHYL TRIMETHATEYLBENZOSDROXYLE, PENZOSDROXY.
