Semilac White Lace 22 ülekandefoolium on valge pitsiline ülekandefoolium, mis on mõeldud küünekaunistuste loomiseks. See on mõeldud kiire, lihtsa ja muljetavaldava maniküüri loomiseks erilistel puhkudel. See on ideaalne küünekunsti idee igaks juhuks, kus sobivad õrnad ja elegantsed küüned. Semilac ülekandefooliumi võib kanda tervele küünele või kasutada mustrite loomiseks – valik on sinu. See näeb täiuslikult välja nii kahvatute kui ka julgete värvidega. Proovige seda ise!
Semilac ülekandefoolium sobib suurepäraselt UV-hübriid- ja geelmeetoditeks. Fooliumi pealekandmiseks soovitame kasutada Semilac Transfer Foil Glue'i, kuid võite selle kleepida ka kuivanud UV-geellaki kihile või pealislakile (dispersioonkihiga).
MÕÕTMED:
4 x 50 cm
Application of the foil on the whole nail using Semilac Transfer Foil Glue 7 ml:
As usual, prep the nail plate.
Apply the selected Semilac base coat or a different product designed for direct application on the nail plate and cure it under the lamp.
Apply a thin layer of Semilac Transfer Foil Glue and cure it under the lamp.
Place the foil on the nail, with the less-shiny side facing the nail, and stamp it on the dispersion layer of the glue applied earlier, remembering to press the foil to the nail.
Apply any Semilac top coat and cure it under the lamp (if you are using a classic top coat, degrease the nails after curing the product).
Application of the foil on a selected part of the nail plate (as a subtle decoration) using Semilac Transfer Foil Glue 7 ml:
As usual, prep the nail plate.
Apply the selected Semilac base coat or a different product designed for direct application on the nail plate and cure it under the lamp.
Apply the selected UV gel polish or Semilac colour UV gel and cure it. You can repeat this step to achieve a more intense colour.
Apply a thin layer of any Semilac top coat and cure it (if you are using a classic top coat, degrease the nails after curing). In the case of Semilac Extend 5 in 1 gel polishes, you can skip this step.
Apply a decorative pattern on the Semilac Transfer Foil Glue 7 ml using any Semilac brush or the Semilac Dotting Tool and cure it under the lamp.
Place the foil on the nail, with the less-shiny side facing the nail, and stamp it on the dispersion layer of the Semilac Transfer Foil Glue 7 ml.
Finally, apply any Semilac top coat and cure it under the lamp (if you are using a classic top coat, degrease the nails after curing the product).
Application of the foil on Semilac UV gel polish
This method is more difficult because the UV gel polish dispersion layer is not as tough as the Semilac Transfer Foil Glue 7 ml.
As usual, prep the nail plate.
Apply the selected Semilac base coat or a different product designed for direct application on the nail plate and cure it under the lamp.
Apply a thin layer of any Semilac UV gel polish* and cure it under the lamp. You can repeat this step to achieve a more intense colour.
Place the foil on the nail, with the less-shiny side facing the nail, and stamp it on the dispersion layer of the Semilac UV gel polish applied earlier, remembering to press the foil to the nail.
Apply any Semilac top coat and cure it under the lamp (if you are using a classic top coat, degrease the nails after curing the product).
*The UV gel polish must have a sticky dispersion layer. All Semilac® gel polishes, except for Black Diamond 031, produce a dispersion layer after curing. 031 gel polish can be replaced with Perfect Black 300, which has a dispersion layer.
